1. Lubricate blower and motor bearings.
2. Check belt condition and tension.
3. Clean or replace standard air filter.
4. Check cooling coil.
5. Check operating pressures.
6. Take temperature drop across evaporator coil.
7. Check thermostat, adjust as needed.
8. Check condenser coil.
9. Check fan speed for summer operation.
10. Check safety controls for correct operation and settings.
11. Check voltage and amperage to motors.
12. Check expansion valve and drier flow.
13. Check contractors, starters and controls.
14. Clean condensate drain line.
15. Check all wiring connections and disconnect.
16. Check blower assembly for obstructions.
17. Check evaporator drain pan for corrosion.
18. Check duct work for excessive air leakage.
19. Check level of outdoor condensing unit to insure quiet operation.
20. Check condensing unit temperature rise.
21. Check condenser fan motor bearings.
22. Inspect condenser fan blade for proper balance and general condition.
23. Inspect line set for proper insulation.
24. Inspect opening in wall around line set to insure proper seal.
25. Check proximity of shrubs and bushes to unit to insure proper condensing function.
    

Leggett’s "Cool Check" will keep you from getting stuck in the sticky heat of summer. We’ll keep you cool by making your cooling system as clean and efficient as the day you bought it. Our "Cool Check" inspection, tune-up and cleaning will insure your system's peak performance, prevent costly repairs and add years to the life of the system.

Take advantage of this offer today and not only will we inspect and tune-up your system but you will also qualify for a special 10% Leggett discount.

And that’s not all! While we’re at your home, ask our servicemen to examine your home’s plumbing and electrical systems, too! Leggett’s technicians are trained to service all your plumbing, electrical, heating, cooling and water quality needs!

• Inspect and clean heat exchanger.
• Inspect venting system.
• Test for proper draft on venting system.
• Inspect chimney.
• Inspect and adjust pilot as needed.
• Lubricate blower and motor bearings.
• Check belt condition and tension.
• Inspect and clean gas burners.
• Clean or replace standard air filter.
• Check thermostat and adjust as needed.
• Check fan speed and adjust as needed.
• Inspect inducer motors and wheels.
• Check wiring connections.
• Check blower assembly for cleanliness.
• Take temperature difference across heat exchanger.
• Do efficiency test and set up oil burner for efficient operation.
• Change oil filter.
• Change oil nozzle.
• Inspect and clean pigtails and trim on steam boilers.
• Test all safety controls for proper operation.
• Drain expansion tank on hot water systems.
• Check evaporator and condenser coil on heat pumps.
• Test operation of electric heat banks on heat pumps and electric furnaces.
• Check operating pressures of the heat pump.
• Check the defrost setting of the heat pump.

Leggett's heating system inspection, cleaning and tune-up will provide peak system performance all winter long. Take advantage of Leggett’s lowest service prices of the year, and at the same time, prevent costly emergency repairs while adding years to the life of your heating equipment.

Only Leggett offers service and installation for heating, air conditioning, plumbing, electrical, water conditioning, air filtration, roof/gutter de-icing and more. Ask about our preventive maintenance agreements for your home or business.